Cockpit 2 Release notes

Compatibility with new E2RAD sensor payloads (LOW, MID, HIGH level)
When a battery error is detected the drone goes into autoland mode and the tablet vibrates for 3 seconds to warn the pilot.
LED blink patterns updated, they will now blink red in case of a battery warning or a critically low battery.

Bug fixes:

New Signal Strength indication
The two indicators on the top left corner now indicate downlink and uplink RSSI instead of a quality indicator as it is more gradual and could prevent incidents in tricky environments such as sewers.
Cockpit is now available in French, Spanish, German and Russian.
Error codes added to warning messages.

Bug fixes:

Bug Fixes:

"Old firmware" warning stays forever, even when drone is disconnected
Camera switch toggled with no video after automatic switch to SD
Cockpit not informing the user that the FW is not the right one with the current Cockpit version.
Distance sensor text overlaps with imperial units when distance > 100
Camera turning on by itself if previously on and drone is restarted

Photogrammetry flight mode now has grid lines overlaid to help with managing overlap during flight.
New warnings to communicate about hardware issues in the transmission system.
Added warnings to communicate that motors are approaching or have exceeded the maximum recommended replacement interval of 25 flight hours.
Added warnings to communicate that the battery is approaching or has exceeded the maximum recommended lifetime of 40 discharge cycles.
Battery SoC estimation is shown only if battery cycles < 40
Warning to detect defective battery through high cells imbalance

Bug Fixes:

Battery diagnosis menu panel to access BMS data
New in flight battery status monitoring (temperature and internal resistance)
Motor diagnosis and flight time data added to maintenance menu panel*
Live video feed can be switched to composite (SD) if the HDMI (HD) feed fails camera SD card status icon on main screen shows remaining free space

Bug Fixes:

Circular buffer implemented for backup recording to ensure it can always record
Battery current draw now always correctly displayed
No longer crashes when changing settings panel while initiating connection with drone
No longer crashes when arming the drone
Cage free view, auto close up and strobing are now synced with CAMOP RC
No longer crashes while performing Auto Trim
Cam feed now always shows up when you tap "display camera"
Next service due time no longer displayed (irrelevant to E2)
Known limitations: Motor flight hours stop recording after 140 flights, use drone flight hours to keep track

Last updated 3 months ago

Was this helpful?

Compatibility with new E2RAD sensor payloads (LOW, MID, HIGH level)
When a battery error is detected the drone goes into autoland mode and the tablet vibrates for 3 seconds to warn the pilot.
LED blink patterns updated, they will now blink red in case of a battery warning or a critically low battery.

Bug fixes:

New Signal Strength indication
The two indicators on the top left corner now indicate downlink and uplink RSSI instead of a quality indicator as it is more gradual and could prevent incidents in tricky environments such as sewers.
Cockpit is now available in French, Spanish, German and Russian.
Error codes added to warning messages.

Bug fixes:

Bug Fixes:

"Old firmware" warning stays forever, even when drone is disconnected
Camera switch toggled with no video after automatic switch to SD
Cockpit not informing the user that the FW is not the right one with the current Cockpit version.
Distance sensor text overlaps with imperial units when distance > 100
Camera turning on by itself if previously on and drone is restarted

Photogrammetry flight mode now has grid lines overlaid to help with managing overlap during flight.
New warnings to communicate about hardware issues in the transmission system.
Added warnings to communicate that motors are approaching or have exceeded the maximum recommended replacement interval of 25 flight hours.
Added warnings to communicate that the battery is approaching or has exceeded the maximum recommended lifetime of 40 discharge cycles.
Battery SoC estimation is shown only if battery cycles < 40
Warning to detect defective battery through high cells imbalance

Bug Fixes:

Battery diagnosis menu panel to access BMS data
New in flight battery status monitoring (temperature and internal resistance)
Motor diagnosis and flight time data added to maintenance menu panel*
Live video feed can be switched to composite (SD) if the HDMI (HD) feed fails camera SD card status icon on main screen shows remaining free space

Bug Fixes:

Circular buffer implemented for backup recording to ensure it can always record
Battery current draw now always correctly displayed
No longer crashes when changing settings panel while initiating connection with drone
No longer crashes when arming the drone
Cage free view, auto close up and strobing are now synced with CAMOP RC
No longer crashes while performing Auto Trim
Cam feed now always shows up when you tap "display camera"
Next service due time no longer displayed (irrelevant to E2)
Known limitations: Motor flight hours stop recording after 140 flights, use drone flight hours to keep track

Last updated 3 months ago

Was this helpful?