Elios 1 Remote controller stick calibration
Calibration ensures that the control sticks have the correct center point and range. The status LED on the GCS unit will blink red, and a beeping sound will be heard when calibration is necessary. The control sticks can be calibrated with the DJI GO app by following these steps:
Install "DJI GO--For products before P4" on your personal device. We do not recommend installing it on the provided tablet. Cockpit and DJI GO do not get along well. Download DJI Go App for Android or IOS
Connect the GCS to a device with DJI GO, turn on the GCS, and launch DJI GO
DJI GO will automatically detect the Lightbridge 2, and press on the "Camera" button
DJI GO will ask you to update the firmware of the Control unit. DO NOT do this. The firmware version of the controller must remain at version 1.2.10
As DJI GO and Elios Cockpit don't get along, we do not recommend installing it on the Flyability tablet. We recommend installing DJI GO on your personal device, such as a smartphone or tablet.
Instructions

In the next screen, press the settings icon in the top right corner
In the settings menu, select the transmitter icon tab, then press on the "Remote Controller Settings" arrow

Press on the "Remote Controller Calibration" arrow

Press "Calibrate" and follow the instructions on the screen

Last updated
Was this helpful?