B-RID for Elios 2 mounting instructions

This article will explain how to mount the B-RID support for Elios 2

Received material

  1. IPA wipe
  2. Support with attached securing o-ring
  3. Replacement o-ring

Step-by-step Guide

Clean the surface of the bottom electronic cover

Peel off the adhesive protection from the bottom of the B-RID support

Position the support over the top electronic cover and apply little force to allow the adhesive to stick

Place the Remote ID device and secure the Remote ID device with the o-ring

Recommended Remote ID device

We have tested Elios 2 with the Dronetag Beacon. While you could use another model, we highly recommend using this one as the support has been made to fit with it.

If you prefer to use another type of device, please be sure that the dimensions do not exceed 36.5 mm (l) x 25 mm (w) x 16 mm (h) and that no external antennas are needed or present.