# Inspector 5 - Quick Start Guide

Inspector 5 is the official Flyability software used to organize and analyze inspection footage gathered from the Elios 3 drones. This version of Inspector is not compatible with data gathered from Elios 2 and Elios 1 drones.

***

### **Software requirements**

To smoothly download and work on Inspector 5 we suggest that you have a Desktop PC that matches the following requirements (or above):

| **Minimum**                          | **Recommended**               |
| ------------------------------------ | ----------------------------- |
| Windows 11 64-bit                    | Windows 11 64-bit             |
| Intel Core i5-1135 or AMD equivalent | i7-8750H @2.20GHz (6 cores)   |
| 16GB RAM                             | 16+ GB RAM                    |
| Iris Xe Graphics (Minimum tested)    | Nvidia GTX 1050 or AMD RX 560 |
| 30 GB Storage                        | 250+ GB Storage               |

***

### **How to install Inspector 5**

1. To install Inspector 5 please go to [this link](https://www.flyability.com/inspector) and download.
2. Once downloaded, open the file titled "InspectorSetup-24.2.0.15-x64-Release.msi".
3. A new panel will appear. Go through each step and then click "Install".
4. A pop-up window will open. Please proceed by selecting "Allow".
5. Finally, launch Inspector 5 on your device.

If any issues were to occur during the installation of Inspector 5 please contact us at <support@flyability.com>.

***

### Moving from Inspector 4 to Inspector 5

If you were a previous Inspector 4 user, you may want to transfer the data you collected in Inspector 4 to Inspector 5.&#x20;

{% hint style="info" %}
**Elios 3 on board datasets**

Before updating to the new drone firmware, please import all dataset present on the drone memory and erase the memory with Inspector 4

If you have updated your drone and did not import previous datasets, you can downgrade your drone. Please read [this article](/software/inspector/inspector-5/common-workflows/retrieve-previous-flight-data-from-your-elios-3-since-2024-april-update.md) or [contact support](mailto:support@flyability.com) if needed.
{% endhint %}

{% hint style="info" %}
**Elios 2 datasets**

Inspector 5 does not have Elios 2 mapping features and Asset Management is not compatible with Elios 2.

Elios 2 datasets can still be viewed from Inspector 5. You may find more information in the user manual.
{% endhint %}

#### To transfer your data to Inspector 5:

1. Open Inspector 5 on your PC.
2. Click on the "Import" tab in the menu on the left side of the screen.
3. When the new window appears, on the top part of your screen you will see the options to import from *Elios 3*, *Inspector 4*, or *Inspector 5*. Click on Inspector 4.
4. Select the folder where your flight/s are stored.
5. Inspector 5 will ask you to organize your previous flights following the new data organizational structure. To do so please create or select an existing *asset* (e.g., Tank #56) and *inspection* (e.g., Roof inspection 02.04.2024) for the flight/s you are importing.
6. Then select "Import".
7. Go to assets and you will find your imported flight.

{% embed url="<https://www.youtube.com/watch?v=VGVLlNEaNl0>" %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://knowledge.flyability.com/software/inspector/inspector-5/software-quick-start-guide/inspector-5-quick-start-guide.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.